
PRODUCTS
Product categories
Product categories

Polyurethane prepreg
Features:
1. High dimensional accuracy
2. The layering is simple and can be laid accurately in strict accordance with the performance requirements
3. The production environment is clean and tidy, with little impact on the environment, and basically no VOC emissions.
4. Good mechanical properties, better product designability and weight reduction effect;
5. Excellent tear resistance and impact resistance;
6. Low pressure molding, fast curing, short molding cycle, high temperature demoulding;
7. Good toughness, wear resistance and good manufacturability;
8. Good secondary processing performance and weather resistance
1. High dimensional accuracy
2. The layering is simple and can be laid accurately in strict accordance with the performance requirements
3. The production environment is clean and tidy, with little impact on the environment, and basically no VOC emissions.
4. Good mechanical properties, better product designability and weight reduction effect;
5. Excellent tear resistance and impact resistance;
6. Low pressure molding, fast curing, short molding cycle, high temperature demoulding;
7. Good toughness, wear resistance and good manufacturability;
8. Good secondary processing performance and weather resistance

SMC raw materials
Features:
1. The density is 1.4-2.0g/cm3.
2. It can form products with complex structure at one time, and can realize the presetting of reinforcing ribs, variable thickness and connecting parts.
3. High precision brought by high integration, as well as reduction of mold cost and assembly cost.
4. The formula can be adjusted quickly to adapt to more special occasions, such as combustion, deformation, heat resistance, and chemicals.
5. The surface is smooth and clean, can achieve the A side effect
1. The density is 1.4-2.0g/cm3.
2. It can form products with complex structure at one time, and can realize the presetting of reinforcing ribs, variable thickness and connecting parts.
3. High precision brought by high integration, as well as reduction of mold cost and assembly cost.
4. The formula can be adjusted quickly to adapt to more special occasions, such as combustion, deformation, heat resistance, and chemicals.
5. The surface is smooth and clean, can achieve the A side effect

Hongyan Iveco pedals
Technical features:
1. Small changes in material size and high matching
2. Embedded parts design, high integration
3. Variable thickness, stiffener design
1. Small changes in material size and high matching
2. Embedded parts design, high integration
3. Variable thickness, stiffener design

GMT products
1. GMTex with special performance is locally enhanced.
2. The molding cycle is about 1min
3. High mechanical properties and low density
4. Recyclable
5. Good impact resistance
6. Strong chemical and corrosion resistance
7. Very good vibration performance
8. Excellent resistance to crack growth
2. The molding cycle is about 1min
3. High mechanical properties and low density
4. Recyclable
5. Good impact resistance
6. Strong chemical and corrosion resistance
7. Very good vibration performance
8. Excellent resistance to crack growth

GMT products
1. GMTex with special performance is locally enhanced.
2. The molding cycle is about 1min
3. High mechanical properties and low density
4. Recyclable
5. Good impact resistance
6. Strong chemical and corrosion resistance
7. Very good vibration performance
8. Excellent resistance to crack growth
2. The molding cycle is about 1min
3. High mechanical properties and low density
4. Recyclable
5. Good impact resistance
6. Strong chemical and corrosion resistance
7. Very good vibration performance
8. Excellent resistance to crack growth

SMC sink
Technical features:
1. High surface finish
2. Good dimensional stability
3. Resistant to dirt and heat
4. Good mechanical strength
1. High surface finish
2. Good dimensional stability
3. Resistant to dirt and heat
4. Good mechanical strength

Polyurethane prepreg products
Features:
1. High strength
2. Light weight
3. Low pressure forming
4. High temperature demoulding
5. Fast curing, short molding cycle
6. Small one-time investment
1. High strength
2. Light weight
3. Low pressure forming
4. High temperature demoulding
5. Fast curing, short molding cycle
6. Small one-time investment

Chase G10 rear spoiler
Features:
1. No burning rate
2. Class A surface
3. High matching degree with ceiling lights and car roof
4. Lightweight
5. Excellent surface spraying performance
1. No burning rate
2. Class A surface
3. High matching degree with ceiling lights and car roof
4. Lightweight
5. Excellent surface spraying performance

Bottom guard
Features:
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.

Bottom guard
Features:
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.

Bottom guard
Features:
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.
1. Good impact resistance, resistance to stone impact and falling ball impact
2. High creep resistance, good dimensional stability and high forming accuracy.
3. Excellent fatigue resistance, 150℃, 1000h, heat aging, no obvious change.
4. Good stability in high temperature and humid environment.
Previous page
1
2
Next page
Contact us
Tel:86-513-68333099
Email:luke@huamanchina.com
Add:No. 6, Tianyi Road, Hai’an Economic Development Zone, Nantong City, Jiangsu Province, CHINA.

WEBSITE
Copyright © 2020 HUAMAN 苏ICP备2021005934号 Powered by www.300.cn